Including a sensor in the bottom for couning and an on/off button for the spray fluxer, this system can connect directly to the insertion conveyor. Once inside, you can choose between how the titanium finger conveyor works, "L" finger for pallet, or dual hook finger for PCB.
An air supply allows the spray fluxing system to work with air flow pressure. The flow pressure is adjustable by pressure parameters and at each meter there are recommended setting parameters for operator's reference.
The solder pot is 3mm thickness pure titanium made. It can be moved in/out and up/down automatically. Really easy to swap between leaded and lead-free. The Italy-made wave motor will keep the wave stable and assure long lifetime
This cover for preheating zone, allows monitoring PCB runs by eyes. The heaters and blowers can be drawn out from the machine making maintenance much easier.
PBC Width | 1.18-15.75in |
Pot Volume | 859.8 lbs |
General Power | 22KW |
Running Power | 7.5KW |
Machine Dimension | 123.62(L)49.21(W)62.99(H) |
Net Weight | 1,653.46 |
Controlling System | Touch Screen control |
Conveyor Motor | 1Ph 220V, 60W |
Conveyor Speed | 7.87in-59.06in/min |
Flux Volume | 6.5 liters |
Alcohol Volume | 4.5 Liters |
PCB Direction | Left to Right |
Spray Drive | Air cylinder drive |
Sprayer | ST-6 made in Japan |
Preheat | 2 hot air convection zone/31.5in length |
Preheat Power | 4kw/zone |
Solder Pot Material | Ti |
Solder Pot Heater | Cast Iron Heaters |
Solder Pot Power | 1.2KW*10PCS |
Wave Number | Dual Waves |
Wave Type | Turbulent first wave, Lambda second wave |
Time for Solder Melt | 60 minutes |
Solder Pot Upper/Down | Manual |
Solder Pot In/Out | Manual |
Finger Cleaning Pump | 1PH 220V 10W |
Conveyor Type | Hook Ti finger |
Solder Angle | 3-6° |
Air Supply | 3-5 BAR |
Power Supply | 3PH 220V 60HZ OR 3PH 380V 50HZ OR 3PH 440V 60HZ |