Dispensing Systems are used to deliver the desired quantity of substances with superior precision, the GR 300S2Y with is an automated desktop type dispensing robot with X/Y/Z 3 axis step motor control and with a variety of dispensing valve and material feeding system to meet different material dispensing requirement.
This robot come standard with a Built-in a fully integrated dispensing controller and with independent air regulator and suck back function.
The options of Various valves with glue feeding system meet different fluid dispensing requirement such as UV adhesive, EPOXY (black adhesive), white adhesive, SILICON, epoxy resin, grease , conformal coating fluid, and other kinds of fluid dispensing.
|Stroke (mm)||X and Y axis||300mm|
|Stroke (mm)||Z axis||80mm|
|Speed (mm/s)||Z axis||2.5 - 250|
|Speed (mm/s)||X and Y axis||±0.05mm|
|Dimensions (mm)||W x D x H||550 x 540 x 660|
|Weight||Net Weight||50 KG|
|Power source||Voltage / Frequency||AC220V, single phase, 50/60Hz|
|Programming||Teaching method||Hand-held teach pendant, Manual Data input|
|Programming||Motion control||PTP, CP(3dimensionalstraightline/circular center polation)|
|Programming||Program capacity||2G memory, 100 programs or instruction ≤8000|
|Maximum Load||X-Y Axes: 15Kg (33lbs.) Z Axis: 6Kg (13lbs.)|
|Working temperature||0 - 40°C (32-104°F)|
|Air Input||5 Kg/cm2 (approx.70psi)|