PCB Unlimited offers a great selection of SMT line equipment, including manual and automatic stencil printers, pick-and-place machines, curing machines, and more. We offer high-quality printed circuit board reflow ovens that can cater to both low- and mid-volume surface mount assemblies.

PCB Unlimited has partnered with the industry’s top manufacturers, such as DDM Novastar, LPKF, Spide, Torch, and Dektec. The SMT line equipment that we offer features state-of-the-art designs, and each machine is built to the highest standards while attaining excellent cost/performance ratio.

Browse our SMT machines for sale below and don’t hesitate to reach out to us with any questions you may have.

SMT Stencil Printers

A stencil printer that applies paste with accuracy and repeatability is critical to PCB assembly. It is the best way to assure defect-free assembled circuit boards. We offer manual and automatic printers.
The SMTrue(TM) Vision Assist stencil printer is cost efficient and has precise alignment for stencil to printed circuit boards down to 12 mil ultra fine pitch components.
Money orange $13,990.00
The Gold-Print™ SPR-45 automatic SMT stencil printer, similar to the SPR-40, is more automated with its power sweep squeegee and power frame lift for higher volume runs. For fine pitch applications the friendly precision controls make PCB assembly operation simple and easy.
Money orange $9,620.00
The Gold-Print™ SPR-40 is a semiautomatic SMT stencil printer designed for medium volume surface mount assembly. The dual squeegee with individual pressure control makes solder paste deposition on printed circuit boards accurate and repeatable.
Money orange $8,420.00

SMT Pick & Place Machines

Pick & Place Machines are used for high speed, high precision placing of broad range of electronic components like capacitors, resistors and integrated circuits onto printed circuit boards. The machines that we offer were designed for facilities needing quick set-up, ease of operation, and high reliability in low to medium volume pick & place applications.
  • 4 Heads
  • 50 Electric Feeders
  • 6 Cameras
  • Precision Servo Mechanism
Money orange $9,995.00
Delivered to your door
The LS40V is our most popular model with Vision. The LS40V offers technologically advanced features with a 13" x 22" (330mm x 559mm) work area, 56 single feeder positions (up to 84 feeders using bank feeders) where quick setup, ease of operation and high reliability are paramount.
Money orange $37,500.00
Most flexible pick and place model with Vision offers technologically advanced features and automation with a 13" x 32" (330mm x 813mm) work area, 88 single feeder positions (up to 132 feeder positions using bank feeders), where quick setup, ease of operation, and high reliablity are paramount.
Money orange $39,500.00

SMT Reflow Ovens

A reflow oven is a machine used primarily for reflow soldering of surface mount electronic components to printed circuit boards. The oven usually contains multiple zones, which can be individually controlled for temperature. We offer benchtop batch solder reflow oven to automatic floor style systems.
M10 Lead free Reflow oven is specially designed for mid-high volume production.
  • 10 upper and 10 bottom forced hot air convection zones allow high quality lead-free soldering with uniform heating and exceptional process stability
  • Temperature accuracy of ±1°C, ensure the best temperature control across the Printed Circuit Board Assembly
  • Mass production requirement in the range of 900-1400pcs/8hours (Take 300x300 PCB as reference)
Clock fast Lead Time: 4 weeks Money orange $33,950.00
Higher throughput SMT reflow oven with 20" (508mm) wide conveyor for production runs. The 2000HT hot-air reflow system utilizes our patented Horizontal Convection Heating technology with digital temperature controls for extremely uniform air circulation and temperature profiling across the board – providing enhanced process control. The soldering does not exceed limits acroos the board so every SMD is protected. The unit is available with maximum heating temperature of 250°C (482°F) for lead solder or hotter 400°C (752°F) for lead-free solder operation.

Money orange $26,995.00
This convection reflow oven is ideal for mid-to-high volume lead-free soldering production lines.
  • 8 upper and 8 bottom forced hot air convection zones allow high quality lead-free soldering with uniform heating and exceptional process stability
  • Temperature accuracy of ±1°C and a high-speed CE certificated blower for maximum convection
  • Individual temperature control for all zones
Clock fast Lead Time: 4 weeks Money orange $24,750.00

Curing Machines

They are easy to integrate with different Conformal Coating machines. Available in different lengths, they provide the flexibility to match your production requirements and feature robust construction and a streamlined appearance.
IR-2033P, IR-2644P, IR-3355P
and IR-4066P
We are offering eight different IR Curing Oven so, depending on your product size, weight, drying temperature, and output requirements, we can recommend the appropriate oven.
Request a Quote
When conformal coating is applied by a robotic machine (instead of a human operator), it reduces operational mistakes resulting in better quality products, lower labor cost, minimizes taping, masking and hand spraying. The AD-200 Benchtop Selective Coating Machine makes it possible to dispense conformal coating with extremely high accuracy and repetition. It comes standard with built in dispensing controller with independent air regulator. This low-cost benchtop selective coating machine reduces material waste and raises production output causing a quick return of the investment.
Money orange $7,500.00

PCB Conveyors & Handling Equipment

This type of equipment is used in the PCB assembly process to enhance production efficiency and reduce cost. They are designed for easy installation and fast ramp up. Each module has an on-board control system which allows the unit to function independently.
The SMBH-2000 incorporates its own fully programmable touch panel offering complete control over pitch, spacing, top or bottom loading ensuring quick and easy placement and removal of loaded magazines.
Clock fast Lead Time: 4 - 6 weeks Money orange $17,184.00 $16,184.00
The SMBH-1000 incorporates its own fully programmable touch panel offering complete control over pitch, spacing, top or bottom loading ensuring quick and easy placement and removal of loaded magazines.
Clock fast Lead Time: 4 - 6 weeks Money orange $15,128.00 $14,128.00
The Combo Loader, loads your production line automatically, It is equipped with two PCB loading modes and especially suitable for single-line mode which processes double-sided PCBs.

Loader are available in bigger sizes for bigger PCB/panels.
Money orange $9,440.00

Inspection systems

One of the most crucial steps that affects the finished quality of circuit boards is the application of solder paste, Solder paste application is the key process in board assembly operations using SMT techniques. Inspections systems are designed for both pre-reflow and post-reflow inspection covering a comprehensive list of component and solder joint defect types.

Dry Cabinets

Dry cabinets are practical, inexpensive solutions to control and prevent, moisture, they protect, and kept dry your moisture absorbent materials such as electronic components, circuit boards, films, Chemical and Medical Materials, and other vulnerable materials.
According to IPC/JEDEC J-STD-033 Joint Industry Standard moisture sensitive devices (MSDs) should be stored in a moisture-free environment.
Money orange $1,995.00
The Dry master 555L is a practical solution to keep your sensitive devices under controlled level of humidity.
Money orange $3,475.00
The Dry master 1000L has 4 individual doors with compression handles and glass windows with an internal size of W1140mm x D560mm x H1580mm and 5 Adjustable Shelves by adjusting spring. Its dehumidification module, can achieve a superior humidity control.
Money orange $3,695.00

Hot Bar Soldering Machines

Hot Bar soldering, Also known as (Pulsed heat Thermode or pulse bonding ) is accomplished when two pre-fluxed, solder or adhesive coated parts are heated, causing the solder to melt, flow, and then solidify, forming a permanent electromechanical bond.
HBS-A3 Hot Bar Soldering Machine use thermode technology that based on rapid reflow by pulse heating to effectively solder flexible board on the PCB. Real time display on the touchscreen. CCD+displayer can accurate positioning and soldering quality check.
Money orange $8,500.00
Hot Bar soldering, also known as pulse heat thermode or pulse bonding, is used to join two parts together by melting solder between them to form a permanent electromechanical bond. The head to melt the solder is generated by thermode’s resistance to electrical current.
Money orange $4,500.00
HBS-A4T Hot Bar Soldering Machine use thermode technology that based on rapid reflow by pulse heating to effectively solder flexible board on the PCB. Real time display on the touch screen. Can option CCD+displayer can accurate positioning and soldering quality check. The Z axis is controlled by a stepper motor and can be preset to soldering pressure.
Money orange $5,000.00

Dispensing systems

The SD-450 is a High-Speed Dispensing Machine with a maximum speed on X/Y axis of 1500mm/S, with a maximum Dispensing frequency of opening and closing of valve at full stroke with up to 3000 Hz. Solid motion platform, X/Y/Z axis controlled by servo motor. Equipped with vacuum cleaning device and numerous high precision valve such as pneumatic jet valve, piezoelectric jet valve, screw valve which can meet different dispensing requirement. Standard equipped with visual assist and liquid level in tube detection system and X/Y/X auto correction platform. The valves are not included they are options depending of your applications.
Clock fast Lead Time: 4 weeks Money orange $49,950.00
The GR300S is an automated desktop type dispensing robot with a variety of dispensing valve and material feeding system to meet different material dispensing requirement
Money orange $5,950.00
The GR300S2Y is an automated desktop type dispensing Robot with double-station, 2 independent control working stations apply to more dispensing projects, dispensing and replacing product can be executed simultaneously by 2 work stations dispensing robot, dispensing head never stop, it greatlly improve production effiency.
Money orange $7,550.00
×