Get Thousand of Dollars in Free PCB's In some Wave Solder Machines VIEW MORE
Get 15% on some Selective Soldering Machines VIEW MORE

PCB Unlimited offers a great selection of thru-hole equipment including wave solder machines, solder fountains, lead formers and component counters.

We represent some of the top American, European and Asian manufacturers including Novastar, Dektec and Torch. Their thru-hole equipment was designed and built to provide economical solutions for low to medium volume through hole assembly.

Wave Solder Machines

We offer a range of machines for lead and lead-free wave soldering applications from bench top to high production floor models, with solder wave configurations from 8 to 24 inches (203.2mm to 609.6mm) wide.

  • Lead or Lead-Free solder compatibility
  • Single or dual wave soldering capability
  • Flexibility with quick change, motorized lead or lead-free solder pots
  • Increase through hole soldering speed with dual wave soldering capability
If you are searching for the maximum level of automation and performance in a single heavy duty wave soldering machine, then this is the machine for you.
Clock fast Lead Time: 35 days Money orange $50,000.00
Delivered to your door
When you buy this machine, you receive a certificate in your email
Touchscreen controlled Lead-free wave solder with titanium finger conveyor/stepper controlled spray fluxer. One hot air preheating zone and pure titanium solder pot

Delivered to your door for this price!
Clock fast Lead Time: 2 - 4 weeks Money orange $26,000.00
Delivered to your door
Automatic wave solder system with proven performance, self-contained fluxing, preheating and laminar (smooth) solder wave modules. Decrease labor costs by significantly reducing hand soldering.
The Spartan 12S (Single wave) and 12D (dual wave) solder machines can process printed circuit board assemblies up to 12” x 15.8” wide and require very little solder for their size. The single or dual wave soldering systems come complete with Conveyor, Foam Fluxer with Integral Air Compressor, Preheaters, and Stainless Steel Solder Pot with drain valve, and compact microprocessor Controller.
Money orange $12,995.00

Selective Soldering Machines

Parts to be selectively soldered are usually surrounded by parts that have been previously soldered in a surface-mount reflow process, and the selective-solder process must be sufficiently precise to avoid damaging them, we are offering some options that can be use for your appications.
Shipping cost is included.
This machine is standard equipped with a servo motor, robotic platform or moving table, with fluxer drop jet nozzle, bottom IR preheater, selective solder pot, inline N2 heater system, auto wave height calibration, live-on camera, Industrial PC Windows 10 English software.
Clock fast Lead Time: 35 days Request a Quote
The ADS-3530 is ideal for assemblers looking for an easy and affordable way to improve soldering speed and consistency. The machine features a pin-type, fixture-less board holder for PCBs up to 350 x 300 mm.
Money orange $7,250.00
The Flex-I2 Compact Dual Pot is very versatile, allow you to use one solder pot for lead free Boards and at the same time use the other solder pot for another boards project or solder two of the same boards in a pallet at the same time, for larger production, or one pot for lead free and the other pot for leaded assembly.
Clock fast Lead Time: 2 weeks Request a Quote

Solder Fountain

High temperature, lead-free Solder Fountains with blow-thru air nozzles are used for removal and replacement of through-hole components, connectors, etc. mounted on printed circuit boards.
This Selective Soldering Machine SY-338SP, is used for Soldering and rework soldering of Thru hole components.
Money orange $6,300.00
The Gold-Wave™ High temperature, lead-free Soldering Fountain used for removal and replacement of through-hole components, connectors, etc. mounted on printed circuit boards.
Money orange $4,490.00
The Gold-Wave™ High temperature, lead-free Soldering Fountain used for removal and replacement of through-hole components, connectors, etc. mounted on printed circuit boards.
Money orange $3,990.00

Component Counters

PCB Unlimited offers a selection of component counters and trimmers that will become the ideal solution for your THT and SMT counting needs. Our radial and axial Trimmers count with high speed output of 12/26 components per turn respectively, with easily adjustable cut lengths that can be set in less than one minute.
GC-40 Motorized Component Counter, reliable and easy-to-use systems with presettable count for any Axial, Radial or SMD device. Made to last, reliable, easy to use systems for any type of taped device - Axial, Radial or SMD. The ideal solution to all your counting needs.
  • Motorized deluxe reel stand
  • Presettable count with audible beep
  • AC or battery operation
  • Five (5) digit LCD display
  • Forward / Reverse function makes counting foolproof
  • Counts taped SMD, Axial and Radial components on one machine
  • Divide-by feature permits exact count of virtually all types and sizes of components
  • Non-contact photoelectric infrared smart sensor
Money orange $3,495.00
The GC-12 component counter is a reliable and easy-to-use system for any Axial, Radial or SMD device. These counters are rugged, reliable, easy to use systems for any type of taped device - Axial, Radial or SMD, the ideal solution to all your counting needs.
  • Four (4) digit LCD display
  • Forward / Reverse function makes counting foolproof
  • Counts taped SMD, Axial and Radial components on one unit
  • Non-contact photoelectric infrared smart sensor
  • Counts up to 100 components per second
Money orange $2,995.00 $2,200.00
This lead forming machine will trim a wide range of components. It not only routinely accepts various types of caps - TO-92s, LEDs, SIPs etc. - but in the machine's manual mode will easily form and trim leads on components that are too top heavy for other vibratory processors. The reason for the RTVs versatility is an exclusive vibratory mechanism which operates in a horizontal plane. This provides far greater stability so parts can be more consistently processed.
  • Linear vibratory feed track
  • Fully adjustable cut length with built-in scale
  • Processing speeds up to 3,000 cph
  • Automatically separates finished components from scrap
Money orange $2,495.00

Router Machines

This AR-450 is equipment with high speed spindles, 42000 RPM will be able to cut PCBs made of FR4, fiber glass, Al, and can ensure <0.05mm routing accuracy.
Clock fast Lead Time: 4-5 Weeks Request a Quote

Soldering Robots

Automatic Soldering Robots, are the solutions that meet the demands of applications that are too challenging for hand soldering. Robot soldering produce high quality soldering, are reliable, and guarantee 100% repeatability.
The GR 300D2Y is an automated desktop type dispensing robot with two stations with independent control so you can be dispensing and replacing simultaneously dispensing robot, dispensing head never stop, it greatly improve production efficiency.
Clock fast Lead Time: 4 weeks Money orange $6,950.00
The GR300S is an automated desktop type dispensing robot which offers long term operational reliability and consistent repeatability for precise adhesive, sealant and solder paste applications.
Clock fast Lead Time: 4 weeks Money orange $5,200.00
This IBot-1 Soldering robot comes with a single PCB station that can move in Y direction, with tip that can move in X, Y, Z, R, directions, soldering wire feeding with motion system, and a 250W heating system that has a rapid temperature recovery time.
Request a Quote

PCB & Stencils Washing Machines

PCB & Stencil Cleaning Equipment We provide a high quality, precision cleaning performance, inline and off line PCBs and stencil cleaning/washing machines.
The HS-800 can wash 30 nozzles at one time, using high pressure D.I water for cleaning and drying.
Clock fast Lead Time: 4 weeks Money orange $5,500.00
When cleaning assembled printed circuit boards also known as PCBA cleaning, the main goal is to remove resin and flux residues from populated boards and hybrids as well as production related residues created by handling.
Request a Quote

Components Insertion Machines

This is a high speed, Automatic, modular compact, high precision, component insertion machine that can be easily integrated into a production line, for highly efficient production. The component feeder available for this machines are tape feeder , tube feeder , tray feeder , vibration feeder and customized feeder, you can use multiples component feeding for high insertion automation.With an extraordinary vision system with ±0.05mm insertion accuracy
Clock fast Lead Time: 60 days Request a Quote
×