L-NP64S Automatic Pick and Place System

L-NP64S Automatic Pick and Place System

Part Number: L-NP64S Clock fast Lead Time: 4 weeks Pdf file Data Sheet

The L-NP64S is low-cost turnkey automatic pick and place system that can be put in production right out of the box. Once a specific PCB is programmed, the machine automatically picks up each component from its designated feeder or tray, centers the part, moves to the placement location, and accurately places the part. The feeders automatically position the next component for pick-up.

Can be used for Prototyping - Pilot Manufacturing - Low Volume Production
Pricing Information

Unit Price:

Total: $19,995.00

Main Features

  • Provides affordable automatic pick and place operation in a tabletop system.
  • Easy to set up, easy to program and easy to use with Windows TM based software.
  • CAD editing Software as option.
  • System includes 4 position nozzle changer for most SMT component sizes.
  • Placement accuracy, up to 0.001"
  • Enhanced Accuracy & Repeatability with Linear Scales & Encoders.
  • Uses new Micro Stepper Technology.
  • Placement rates up to 2100 CPH.
  • Cut tape strip holders available in various widths & configurations.
  • Individual 8, 12, 16, 24, 32 & 44 mm & 12 lane 8mm tape bank feeders available. (Not available on the L-NP00 Model).
  • Inserts available for stick/tube/loose components in a vibratory feeder for SMT components including discrete, 0402s, 0603s, SOICs, PLCCs, and 20 mil pitch QPPs.
  • Optional convenient Super Strip™ feeders for short tape strips.

Machine Options

L-NC4 Extra 4 position nozzle changer - for 8 total positions
L-LD Liquid dispenser
L-BHS Board support
L-UCT CAD editor software option
L-SCV Vacuum - self contained

Feeder Options

L-VF Vibratory tube/loose feeder - option
L-T (tape feeders) 8, 12, 16, 24, 32, & 44 mm - option
L-MBH Matrix tray holders (set of 2) - option
L-SS-XX Dual Lane Super Strip TM feeder for strips from 1” to 12”- option
XX indicates tape width: 8, 12, 16, 24, 32, 44, and 56 mm
L-BF-12 12 lane bank feeder for 8 mm tapes
L-BFRH-12 Reel holder for L-BF-12 bank feeder
* Custom options, nozzles and feeders available - contact Us.


Max board area 13.5” x 22” (343 x 560 mm)
Max travel area 22”(X axis) x 22”(Y axis) (560 x 560 mm)
Z axis max travel 1.5” (38 mm)
Board thickness 0.020”- 0.156” (0.5mm - 4.0 mm)
Typical verifiable placement rate 1000-1800 cph
Max placement rate 2100 cph
Placement accuracy ±0.004” to 0.001"
Fine pitch capability See Chart Above
Smallest component capability See Chart Above
Largest component size 1.378” (35mm) square body
Max no. of feeders, 8mm tape width 64 (individual), 96 (bank)
Individual tape feeders 8, 12, 16, 24, 32 & 44 mm (Electrical)
Vibratory feeders loose, tube, stick ( Freq. & amplitude control)
Matrix Tray Feeders with Board/Matrix tray holders
Component orientation Ø-axis motion ±360° in 0.90° step
Board holding Edge clamp w/optional board support tooling
Centering Centering Fingers
Data entry coordinate entry, “teach” mode with color CCD camera, CAD download
Vision system Color CCD card camera
Automatic 4 position tool changer additional changer optional
Operating system Windows®
Dispenser option Time & pressure, clean dry air @ 80 psi required
Centering Centering Fingers
Monitor 15” flat screen monitor included
System dimensions 40” x 42” x 25”h (1016 x 1067 x 635 mm)
Weight 200 lbs (114 kg)
Power 120 VAC, 50/60Hz, 220-240 VAC available
Compressed air Shop Air Required, 60 psi
L-NC4 Extra 4 position nozzle changer - for 8 total positions
L-LD Liquid dispenser
L-BHS Board support
L-UCT CAD editor software option
L-SCV Vacuum - self contained

Shipping cost

shipping depend of address after entering the order a shipping quote will be send to the customer for separated.