The Cognex® vision assist allows accurate placement of 0201s, ultra micro BGAs, CSPs, QFPs and a wide range of virtually all SMT components.
The BGA being centered at the left appears on the software window shown at the right. The LV-series vision centering pick and place systems use the full features of Cognex® vision.
Standard tape feeder sizes include 8mm, 12mm, 16mm, 24 mm, 32mm and 44mm.
The vibratory feeder with frequency and amplitude control can handle loose and tube components.
Unique SuperStripTM feeders are a convenient way to use short tape strips.
Feeder positions are pre-programmed for quick set-up.
With the optional 12 position 8mm bank feeders, capacity can increase by 50%, i.e. the model LS60V would increase to a capacity of 144 8mm tape feeders.
Computer controlled in 10 millisecond increments with separate interval/raise-lower speed allows solder paste or adhesive glue to be applied accurately prior to component placement. This time/ pressure fluid dispenser has dispense rates up to 10,000 dots per hour.
| Max Board Size | 13.5" x 22" (343mm x 560mm) |
| Smallest Component Capability | 0201 components |
| Largest Component Size | 2.00 |
| Placement Accuracy | ± 0.001" (0.025mm) |
| Max Placement Rate | 4800 cph |
| Typical Verifiable Placement Rate | 2500-3600 cph |
| Fine Pitch Capability | To 15 mil pitch (0.381mm) |
| Max Travel Area | 22" (X axis) x 22" (Y axis) (560mm x 560mm) |
| Overall Dimensions | 40" x 42" x 53"h (1016mm x 1067mm x 1336.2mm) |
| Max no. of Feeders (8mm tape) | 56 |
| Max no. of Feeders with L-GB-12 Bank Feeders | 84 |
| Tape Feeders | 8, 12, 16, 24, 32, 44 mm (Electrical) |
| Vibratory Feeders | Loose, tube, stick (frequency & amplitude control) |
| Matrix Tray Feeders | With Board/Matrix tray holders |
| Laser Centering | Touchless Cyberoptics® laser (OPTION ONLY) |
| Vision System | Cognex® Vision |
| Dispenser Option | Up to 10,000 dots/hour |
