Laser Cut SMT Stencils

Prototype SMT Stencils
These frameless stencils are specifically designed to manually print solder paste onto printed circuit boards.
  • Printed circuit board stencils eliminates tedious hand soldering of PCBs
  • Reduce PCB prototype assembly time
  • Available with or without flaps
** The stencil kit comes with a squeegee blade and board holders.
** Using printed circuit board SMT stencils with a Toaster Reflow Oven will make your prototype PCB assembly job easier and save you time.
** We are backing that with a money-back guarantee program.
Clock fast Lead Time: 24-Hour Turn Money orange $125.00
Stainless Steel SMT Stencil

Our stainless steel stencils were specially designed for the Maker’s market so everyone can have access to a high quality SMT stencil at a low price.

  • Eliminates tedious hand soldering of prototype PCB boards
  • Reduce PCB prototype assembly time
  • Better quality than a Mylar or Kapton stencil
  • Starts at $20
Clock fast Lead Time: 3 Days Money orange $20.00
Quick-Turn Rework Stencils

These laser cut stencils are typically used to manually print a single component on a printed circuit board.

  • Maximum Size 2" x 2"
  • Available with or without flaps (Flaps facilitate handling)
  • Mainly used for PCB rework but can used for prototype PCB assembly of simple boards
Clock fast Lead Time: 24-Hour Turn Money orange $80.00
View More

Multi-level / Step Stencils

These step stencils offer superior flexibility in achieving the right solder paste volume deposit for components with diverse paste requirement. You can choose between framed and frameless.
Framed Multi-level / Step Stencils
These Multi-level Stencils offer superior flexibility in achieving the right solder paste volume deposit for components with diverse paste requirement.
  • Provide optimum solder paste volume control
  • Eliminate co-planarity problems
  • Foils are permanently mounted into aluminum frames
Clock fast Lead Time: 48-Hour Turn Money orange $250.00
Frameless Multi-level / Step Stencils
These Multi-level Stencils offer superior flexibility in achieving the right solder paste volume deposit for components with diverse paste requirement.
  • Provide optimum solder paste volume control
  • Eliminate co-planarity problems
  • Significantly less expensive than Framed Multi-level / Step Stencils
Clock fast Lead Time: 48-Hour Turn Money orange $200.00
View More

Electroformed Stencils

Framed Electroformed Stencils
Electroformed stencils offer the best paste release characteristics available and are frequently used for fine pitch (20 mil to 12 mil pitch) SMT applications on printed circuit boards. They are also used for µBGA's, Flip Chip, and Wafer Bumping (12 mil to 6 mil pitch).
  • The smooth trapezoidal sidewalls of an electroformed stencil allow for better paste release
  • Nickel has a lower coefficient of friction compared to stainless steel
  • Electroform foils are harder than full hard stainless steel of comparable thickness, providing for longer stencil life
Clock fast Lead Time: 48-Hour Turn Money orange $550.00
Frameless Electroformed Stencils
Electroformed Frameless Stencils are nickel-based, electroform foils designed to work with stencil tensioning systems also known as Reusable Stencil Frames. They do not need to be permanently glued in a frame. Electroformed stencils offer the best paste release characteristics available and are frequently used for fine pitch (20 mil to 12 mil pitch) SMT applications on prototype printed circuit boards. They are also used for µBGA's, Flip Chip, and Wafer Bumping (12 mil to 6 mil pitch).
Clock fast Lead Time: 48-Hour Turn Money orange $500.00
View More

UltraSlic™ Stencils

Framed UltraSlic™ Stencils
An alternative to Electroform Stencil, UltraSlic™.

UltraSlic™ FG outperforms all other existing stencil technologies on the market today, and it can be shipped in 48 hours turnaround times.
  • Fine Grain stainless steel with superior fatigue strength, super smooth surface and elevated wear factor
  • Superior paste release below surface area ratios of 0.5
  • Higher performance and lower cost compared to electroform, the option of step stencils
Clock fast Lead Time: 48-Hour Turn Money orange $410.00
Frameless UltraSlic™ Stencils
UltraSlic™ Frameless Stencils provide superior aperture registration, higher performance and lower cost compared to electroform, the option of step stencils, and the option of 48 hour turnaround times.
  • Paste release performance comparable to electroform technology
  • Lower standard deviations, higher repeatability and cleaner release of solder paste
  • Reduces storage space requirements
  • Significantly less expensive than UltraSlic™ Framed Stencils
Clock fast Lead Time: 48-Hour Turn Money orange $360.00
View More

Rework Stencils

StencilQuik are flexible solder paste stencils that remain in place on the site location becoming an integral part of the prototype printed circuit board assembly. They allow you to simplify area array device placement/replacement saving 50% or more of the time required to rework BGAs or CSPs.CSPs.
StencilQuik™ BGA Rework Stencils

StencilQuik™ are flexible solder paste stencils manufactured from a polyimide film with a high temperature adhesive covered with a release liner. They serve as both your stencil and alignment device.

  • StencilQuik comes in a pack of 10 BGA rework stencils
  • Allows you to replace your own BGAs or CSPs without special training or large capital equipment expenditures
  • Acts as an insulating barrier between solder balls as the solder paste masks adjacent apertures increasing placement reliability
  • Simplifies BGA placement as you can "feel" the device settle into the apertures of the StencilQuik™
Clock fast Lead Time: 5 to 7 business days Money orange $124.50
Quick-Turn Rework Stencils

These laser cut stencils are typically used to manually print a single component on a printed circuit board.

  • Maximum Size 2" x 2"
  • Available with or without flaps (Flaps facilitate handling)
  • Mainly used for PCB rework but can used for prototype PCB assembly of simple boards
Clock fast Lead Time: 24-Hour Turn Money orange $80.00
StencilMate™ Leadless Device Rework Stencils

Were designed to reliably and quickly replace leadless device packages such as QFNs or LGA packages.

  • StencilMate™ comes in a pack of 20 rework stencils
  • Alignment is simple. No need to use custom fixtures or frames.
  • The stencil is cut using a laser to your exacting device requirements.
  • Eliminate the need to use capital intensive equipment or require a high degree of skill.
Clock fast Lead Time: 5 to 7 business days Money orange $114.50
View More

Tools & Accessories

Temperature Marker 475 F
Designed to work with lead-free paste (Sn96.5 / Ag3.0 / Cu.5). Before placing the PCB in the oven cut a piece of the Temperature Marker with a blade or a sharp knife and place it on the surface of the board next to a large component (PLCC or QFP). Make sure you can see the Temperature Marker material through the oven door. The Temperature Marker material is opaque initially but when 475 °F (246 °C) is reached the material liquifies and becomes shiny, non-reversibly.
Clock fast Lead Time: In stock and ready for shipment Money orange $13.00
Vacuum Pick and Place Tool
HANDI-VAC KIT, Static dissipative, with static dissipative Buna-N vacuum cups. (1) 1/8” and (1) 1/4” vacuum cups on bent probes and (1) 1/8” and (1) 3/8” vacuum cups on straight probes. The vacuum-bulb type tools are the lowest cost pick-and-place tools available. These tools operate very similar to a tweezer. Simply squeeze the vacuum bulb, place the soft suction cup to the part to be handled, then relax your squeeze and the part is firmly gripped. A second squeeze releases the part.
Clock fast Lead Time: In stock and ready for shipment Money orange $18.00
Stencil Wipes (100 wipes)
Stencil Wipes are saturated wipes that can be used for stencil cleaning or misprint cleaning of PCBs. IPA/DI stencil wipes are packaged in containers of 100 wipes. STENCIL WIPES CAN ONLY BE SHIPPED USING GROUND METHOD.
Money orange $30.00
View More
×