Including a sensor in the bottom for counting and an on/off button for the spray fluxer, this system can connect directly to the insertion conveyor. Once inside, you can choose between how the titanium finger conveyor works, "L" finger for pallet, or dual hook finger for PCB.
An air supply allows the spray fluxing system to work with air flow pressure. The flow pressure is adjustable by pressure parameters and at each meter there are recommended setting parameters for operator's reference.
The solder pot is 3mm thickness pure titanium made. It can be moved in/out and up/down automatically. Really easy to swap between leaded and lead-free. The Italy-made wave motor will keep the wave stable and assure long lifetime.
In the preheating zone, the heaters and the blowers can be separated from the machine for easier maintenance.
|859.8 lbs (245Kg)
|Touch Screen + PLC control
|Left to Right
|Stepper motor drive fluxer with rail and slider
|ST-6 Made in Japan
|1 Hot air convection
|Solder Pot Material
|Solder Pot Heater
|Cast Iron Heaters
|Solder Pot Power
|Turbulent first wave, Lambda second wave
|Time for Solder Melt
|Solder Pot Lift (Up/Down)
|Solder Pot In/Out
|3PH 220V 60HZ OR 3PH 380V 50HZ OR 3PH 440V 60HZ